Desiccant Rotor Dehumidifier

Significance of model that

Work

Features

  • 1. Sweden PROFLUTE silicon gel wheel,high dehumidification efficiency, output air dew point can achieve below -20℃, while RH≤2%

    2. High strength aluminium alloy frame, anti-cold bridge

    3. Machine body adopts international fashionable modularization design, foam injected double wall casing, excellent heat and humidity isolation, no dew forming, bottom boards and water pan is made of stainless steel.

    4. PLC automatic control system, human-machine interface, all the parameters can be on-line checked, insuring the operation reliability of the equipment.

    5. Electric or steam heating or convert type can be available

    6. We can provide technical design for dehumidification according to customers’working conditions.

    7. The process airflow can be set from 300m3/h to 60000 m3/h according to customer’s requirement.

Details

  • Functional Buildup
    1. Air filtration(pre-filter, medium filter, HEPA filter can be chosen according to cleanness grade)
    2. Pre-cooling, mixture cooling, post-cooling
    3. Wheel dehumidification(including wheel, drive motor, regeneration fan, regeneration heating system etc.)
    4. Fresh air, reflow air first mixture and second mixture
    5. Electric control system
    6. Above functions can be adjusted according to technics flow
     
    Specification
    It can achieve the efficiency of normal temperature and low humidity through controlling the output air temperature by the combined dehumidification of wheel and refrigeration. After being cooled and dehumidified in pre-cooling process, the process air goes across the wheel for further dehumidification, achieving low humidity efficiency, then the air with normal temperature and low humidity is discharged to certain room by fan after post-cooling process. We can provide technical design for dehumidification according to customers’ requirements. It will need providing cooling water T≤7℃ when using ZCB Series dehumidifiers, or it can be equipped with refrigeration machine with suitable cooling load.

The main parameters

  •  
    Model
    ZCB-2000
    ZCB-3000
    ZCB-6000
    ZCB-8000
    ZCB-10000
    ZCB-15000
    ZCB-20000
    ZCB-25000
    Process Airflow(m3/h)
    2000
    3000
    6000
    8000
    10000
    15000
    20000
    25000
    Regeneration Airflow(m3/h)
    670
    1000
    2000
    2670
    3300
    5000
    6670
    8350
    Output Air
    Temperature(T℃)
    20-25
    20-25
    20-25
    20-25
    20-25
    20-25
    20-25
    20-25
    Relative Humidity (RH%)
    ≤20
    ≤20
    ≤20
    ≤20
    ≤20
    ≤20
    ≤20
    ≤20
    Regeneration
    Electric(kw)
    18
    24
    48
    66
    84
    120
    162
    210
    Steam 0.4mpa
    Kg/h
    40
    50
    100
    120
    160
    240
    320
    400
    mm
    DN25
    DN25
    DN32
    DN32
    DN32
    DN32
    DN32
    DN32
    Power of Process Air(kw)
    2.2
    3
    5.5
    7.5
    7.5
    15
    18.5
    22
    Power of Regeneration Fan(kw)
    0.75
    1.1
    2.2
    3
    3
    5.5
    7.5
    11
    Power of Driving Motor(kw)
    0.09
    0.1
    0.1
    0.1
    0.1
    0.2
    0.2
    0.2
    Cooling Water (T≤7℃)
    T/h
    5
    10
    20
    25
    30
    45
    60
    75
    Diameter (mm)
    DN32
    DN40
    DN50
    DN50
    DN65
    DN65
    DN80
    DN100
    Installed Power(kw)
    Electric
    21.04
    28.2
    55.8
    76.6
    94.6
    140.7
    188.2
    243.2
    Steam
    3.04
    4.2
    7.8
    10.6
    10.6
    20.7
    26.2
    33.2
    Inlet&outlet of Process Air(mm)
    250*400
    320*450
    450*630
    500*800
    630*800
    800*950
    800*1250
    850*1500
    Inlet of Regeneration Air(mm)
    320*320
    320*320
    400*500
    400*630
    400*630
    400*500*2
    400*630*2
    500*630*2
    Outlet of Regeneration Air(mm)
    100*128
    125*160
    180*230
    180*230
    180*230
    220*290
    220*290
    250*330
    Dimension(mm)
    Length
    5100
    5100
    5500
    5600
    5800
    6400
    7400
    7550
    Width
    850
    940
    1240
    1360
    1500
    1760
    1810
    1850
    Height
    1380
    1550
    1930
    2200
    2300
    2700
    2850
    2850
    Power Supply(V)
    3Phase-380V-50HZ(can be customization)
    Weight(kg)
    1200
    1350
    2100
    2300
    2500
    27500
    3100
    3350
    Note: 1. All the parameters base on: The temperature of process airflow and regeneration airflow 35℃, the relative humidity 65%, regeneration temperature 120±10℃
    2. The regeneration heating can use electric, steam or heat transfer oil.
    3. The technology and design can be changed without notification, non-standard requirements or particular specification can be customization.